Produse pentru aprindere automată (17)

Aufgrund ihrer Abmessungen sowie der Kontaktvielfalt können die IN62-Schalter in nahezu jeder industriellen Anwendung zur sicheren Positionsüberwachung eingesetzt werden. Nur mit Stößel-Betätigungseinrichtung erhältlich. Normschalter nach DIN EN 50047 Höchste Zuverlässigkeit bei geringen Strömen (1 mA) Schutzart IP67 Klappbarer Rastdeckel Schutzniveau:IP67 Weitere Eigenschaften:Sicherheit,Kuppenstößel Bereich:für Industrieanwendungen

On requst: Very cost-effective potentiometric rotary sensor with integrated plug

Entspricht den aktuellsten internationalen Normen: ISO 5211 Kompakt gebaut mit modernem Design Kolben und Endkappen aus druckgegossenem Aluminium Vorkomprimierte Lastfeder verspricht sichere Montage- und Demontagevorgänge Hohe Festigkeit

Reparatur, Austausch & Ersatz für ABB Robotersysteme und ABB IRC5 & S4 Pendants Seit Anfang 2018 bieten wir Ihnen generalüberholende Reparaturen sowie Austauschteile und Ersatzteile für Roboter-Bedienhandgeräte der Produktreihen IRC5, IRC5P, S4, S4+, S4C+, S4P sowie S4P+ des Herstellers ABB an. Ab sofort bieten wir Ihnen unsere umfassenden Serviceleistungen auch für alle ABB-Baugruppen (Antriebe, IPCs, Netzteile, Motoren, Kabel uvm.) aus dem Bereich der Robotersteuerungselektronik folgender Baureihen an: • S2 / S3 • S4 / S4C / S4C+ • S4P / S4P+ • IRC5 Neben der Verwendung von vom Hersteller oder Gesetzesgeber zugelassenen Bauteile testen wir die generalüberholten ABB Bedienhandgeräte und ABB Robotersysteme mit originalen IRB ABB-Robotern unter Bedingungen, die Ihrem realen Arbeitsumfeld entsprechen. Damit können wir Ihnen auch hier 24 Monate Gewährleistung* auf die komplette ABB Baugruppe geben.

Compatto, robusto, economia di spazio e circuito leggero, non intercambiabile e breve - prova, alloggio fatto di di alluminio, anche disponibile come circuito stampato senza alloggio CARATTERISTICHE — Specialmente economia di spazio e peso leggero — Uscita di tensione 0… ± 10 V — Progettato come amplificatore di misurazione in-linea — circuito Non intercambiabile e breve - prova Tipo:di tensione Funzione secondaria:di misura Altre caratteristiche:con uscita in tensione, in linea Più caratteristiche:per sensore estensimetrico, compatto

The LHP035 is a square linear solenoid in a robust steel housing, which can be actuated either by pushing or by pulling. The solenoid convinces in various applications with smallest space requirement at high forces. The LHP035 series can be configured with different duty cycles (5, 25, 40 and 100% ED) and different stroke variants (5, 10, 15, 20 mm) depending on the application. The plug (= IP40), sealing ring and bellows (=IP54) ensure an increased degree of protection. Resetting can be performed by means of an optional integrated spring. Special voltage variants of the solenoid are also available on request. Due to its square design, particularly high forces and simple mounting characterize the high-performance linear solenoid. In addition, the strong solenoid convinces with short switching times and a long service life of up to 10 million switching cycles. The configuration options of the LHP035 are versatile. Nominal voltage:24 V Duty cycle:100 % Power consumption:23.78 W Stroke:10 mm Inital force:12.4 N End force:65 N Return spring:No Design:No  Protection class:IP 40 Thermal class:F 155 Connection:Leads / cable Solenoid weight:450 g Armature weight:110 g

Eje hueco continuo Ø 14 mm. Adaptación a diferentes recorridos de medición mediante un amplio espectro de transmisiones de engranajes. Forma constructiva compacta y económica. Salida de potenciómetro o de corriente. Montaje sencillo.

Technical data In general The actuator is especially suitable for the operation of ball valves and butterfly valves with 90°-rotation angle. A waterresistant body with overload protection and a heating device against condensation water. Material Carbon Steel, Aluminium Alloy, Bronze Body polyester coated Installation Vertical as the picture shows. All other installations only after request. Ambient temperature -20°C … +70°C Mounting pad DIN-ISO 5211 Standard voltages 24V DC/AC, 230V AC others on request Protection IP 67 ATEX-Protective class (Option) II 2G EEx d IIB T4 Cable entry 2 x M20x1,5 Protection devices Motor thermostat End stops 2 limit switches. Operating angle 90° ±5° Heater 5W Duty cycle 75% Standard equipment 2 additional limit switches, optical position indicator with add. LED, manual override. Option Please refer to the data sheet The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice!

I-Button Fahrer-Erkennung

Boîtier Ø7 mm Jusqu'à 400 ppr 2 canaux et index Sortie collecteur ouvert Tension d'alimentation 5 V Roulements à billes

KFE Special customer requirements Applications Overview Presses Machine Tools Automatization + Feeders Lifting Gear + Mobile Hydraulics Production Technology Special Machinery CAD Download Contact Electric Locking Unit The electric Locking Unit KFE is used as a stepless locking device on round rods and holds axial forces in both load directions without axial play. It is used where hydraulic or pneumatic solutions are not possible. The holding force is created by the proven spring-operated clamping system as it is used in SITEMA’s hydraulically or pneumatically operated Locking Units. At a drop of the control voltage or in case of failure of the electric supply, the Locking Unit KFE clamps automatically. Therefore, it is also suitable for use in safety relevant applications. To operate the Locking Unit KFE, a supply voltage of 24 V and a control signal for the input command “clamp/release” are sufficient. The Locking Unit is self-monitoring and provides output signals...

Thanks to their standard dimensions as well as the wide range of contacts, the IN62 switches can be used on safety facilities and for position monitoring in virtually any industrial application.Only available with plunger actuator. Standard switches conforming to DIN EN 50047 High reliability at low currents (1 mA) Protection class IP67 Hinged snap-on cover Protection level:IP67 Other characteristics:safety,with plunger Field:industrial

Entspricht den aktuellsten internationalen Normen: ISO 5211 Kompakt gebaut mit modernem Design Kolben und Endkappen aus druckgegossenem Aluminium Vorkomprimierte Lastfeder verspricht sichere Montage- und Demontagevorgänge Hohe Festigkeit

15 mm width, different electrical connection possibilities. Manual override optional, offered as rotary knob to be adjusted via flat-tip screwdriver or as "paddle" for the use without additional tools Function:3/2-way NC  Pressure range:2-8 bar Nominal orifice:2.6 mm Type of electric connection:Wire  Kv-value:3.2 l/min Size:15 mm Actuation type:elektrisch betätigt  Duty cycle:100 % ED Medium:Filtered (5 µm), lubricated and non lubricated air  Nominal power:1.0 W Nominal voltage:12 V DC Nominal current:83 mA Type of pneumatic connection:Flange  Returning mechanism:Spring  Protection class:IP51  Ambient temperature:-20... +60 °C Valve type:Poppet valve  Materials:Housing PBT, Seal NBR  Actuation:pilot controlled 

10 mm width, bistable latching solenoid valve or bistable 3/2-way solenoid valve which require only a short electrical power pulse to change the state. On request other sealing materials like EPDM or FKM are possible. Function:3/2-way Bistable  Pressure range:0 - 10 bar Nominal orifice:0.5 mm Type of pneumatic connection:Flange  Kv-value:0.11 l/min Size:10 mm Duty cycle:100 % ED Medium:Filtered (5 µm), lubricated and non lubricated air  Nominal power:2.9 W Nominal voltage:24 V DC Ambient temperature:-10 ... +50 °C Materials:Base: PBT, seal: NBR 

Pneumatic timers are used for the precise time control of pneumatic signals in pneumatic circuits or systems. The pressure-independent function of time delay starts when pressure is applied to the control port. After the pre-selected time is elapsed, an internal 3/2 way valve is switched. The pneumatic timer is reset to the initial condition if the control port is vented for at least 300 ms. The adjustable time delay depends on the chosen version and amounts between 0.5 and 180 s. Due to its design the control pressure level must not be below working pressure level. As a result of the fire-risk evaluation according to EN 13463-1, the pneumatic timers are not subject to ATEX regulations. This means they may also be used in explosion hazardous areas as defined in IIG/ IID. Time intervall:0.5 - 60 s  Function:3/2-way NC  Pressure range:1.5 - 8 bar Type of pneumatic connection:1/8 NPT  Product type:Timer  Mounting:Subplate  Medium:Compressed air, non lubricated  Ambient temperature:-10 ... +60 °C

The MCP40 potentiometers with precision ball bearings and servo flange are suitable for applications where a very long life with very high linearity and precisely mountable sensor is important. The precision potentiometers of the MCP40 series are designed for high demands on accuracy and reliability. They have outstanding linearity and excellent life expectancy. The sensor is available in a high-resistance version for power-saving requirements. The potentiometer is equipped with a servo flange for precise mounting. In closed loop controlled systems, the conductive plastic potentiometers can be used particularly advantageously. As passive components, they do not cause any dead times due to immediate signal availability, and the signal is continuous without steps available. Very long life Very precise sensor Servo flange for precise mounting 2 Precision ball bearings Robust metal housing Power saving in applications Configuration:single-turn Operation:manual Technology:analog Other characteristics:conductive plastic,precision,for industrial applications